Honda Pioneer Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
100 Posts
Discussion Starter · #1 ·
This is my situation. My truck bed is 60.5 wide. My Pioneer is 59in wide. I'm wanting to get a set of Sti hd3 offset is 5 +2 on either 26 bh or 27in blackwater both at 9in wide front and 11in wide rear.

Now the question is with this wheel combo fit in my bed of the truck? I read the stock offset is 4+2 and 5.25 +2. But then I've read the offset is actually smaller like +1.25 and +1.5. If that's the case I'm outta luck. Does anybody know what the real stock offset is? I would hate to order and it won't fit.
 

·
Registered
Joined
·
373 Posts
I don't think it will fit cause if I remember correctly it makes you about 4" wider when you run after market wheels..
 

·
Registered
Joined
·
325 Posts
If its anything like mine with 4+2 up front and 5+3 in the rear with 28" Bighorns you'll be 64" wide.
 

·
Registered
Joined
·
224 Posts
This might have just changed my mind on replacing my tires and wheels. I will seldom haul my Pioneer but I would like the option of it fitting in the bed of my pick-up. Would still like a set of Bighorns on it, maybe live with the stock wheels?
 

·
Registered
Joined
·
1,395 Posts
Not sure, as the BH's have some sidewall lugs.
 

·
Registered
Joined
·
100 Posts
Discussion Starter · #6 ·
I was thinking that if the offset is the same and the new tires are half an inch wider on each side that would leave me with half inch to spare.
 

·
Registered
Joined
·
1,395 Posts
Yeah, well remember your talking about trying to drive this 1300lb sxs up onto the bed of a truck and having zero room for error in lining it up and driving it on.
 

·
Registered
Joined
·
100 Posts
Discussion Starter · #9 ·
The rims should be the same, except width. Maybe I'll just buy a set of 25in or 26in bh or maybe I'll buy the 27in on 14s and if they don't fit I'll post it here lol.
 
1 - 9 of 9 Posts
Top