Honda Pioneer Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter · #1 ·
I purchased an KFI Stealth 4500 winch for my Pioneer. Got it all mounted with no problem till it came time to hook the battery to the contractor. The battery cables suppled for withe KFI are way to short. What size wire should I use to make my own? I am thinking 6 gauge, but am not sure.
Thanks for helping.
 

·
Registered
Joined
·
182 Posts
Try swapping the wires around. Use the black and red for the winch, and the blue and yellow to the battery. I used the yellow for positive, and the blue for ground. Works great if you ar e mounting the contractor in the front under the hood.
 
  • Like
Reactions: KamiahKid

·
Registered
Joined
·
658 Posts
if you do make cables id get the same size that's with the winch because the winch and battery aren't near big enough to need bigger
 
  • Like
Reactions: KamiahKid
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top